How to clean and maintain the food waste processor

Source: Jinyun lemon tree Environmental Protection TechnolRelease time: 2019-08-16

After the use of food waste processor, if not timely processing, it is very simple to produce odor, so the need for irregular cleaning and protection, general cleaning and protection methods are as follows, the following food waste processor, food waste processor and waste processor manufacturers to talk about.

1. After the food waste is discharged, the food waste processor should be rotated for about 10 seconds, so that the water can wash the waste processor and drainage pipe clean and avoid unnecessary problems.

2. No interval of half a month, it is necessary to use alkaline detergent to clean the interior of the grinding chamber, to remove some of the residual oil in the interior.

3. Grinding chamber cleaning process: cover the water blocking plug, pour about 1/4 of the water into the basin, pour the right amount of detergent, mix with the water, stir evenly, start the machine, slowly open the water blocking plug, let the water flow slowly into the processor, and then open the faucet.

4. It is forbidden to pour water flow higher than 30℃ directly into the garbage processor. If it is operated in this way, the rubber and plastic parts inside the machine will be damaged, so it is strictly prohibited to operate the garbage processor in this way.

5. In the case of long-term non-use, to unplug the power supply, so that you can adhere to the garbage processor life.